If you want a 13x4 Lace Wig that looks natural and has a beautiful hairline, you'll probably want to go with a lace front. In most cases, a lace front wig is unnoticeable, as the manufacturer ties hair strands to a wig cap, ensuring it looks like you are growing your hair out. The most popular lace front wigs on the market are the 13x4-inch and 13x6-inch lace front wigs, which come in a variety of sizes. How to pluck and customize a 13x4 lace front wig
You will need a 13x4 Lace Frontal, a Styrofoam wig stand, pins, tweezers, and scissors.
Step 1
When your wig arrives, the first thing you need to do is see if it fits. If the wig is too small or too large, you need to replace it. So, don’t start plucking before you make sure that you have bought the right size because you won’t be able to return 13x4 Lace Front Wig.
Step 2
If the wig fits and everything look good, you need thoroughly wash it.
Step 3
Place the 13x4 Lace Frontal Wig on a Styrofoam stand and use pins on the lace to pin it down. You want to have it nice and tight so that it doesn’t move.
Step 4
Take a good look at the wig hairline, you will notice that it is pretty dense and that’s what you want to avoid. Start plucking some hairs from one side and work your way to the other. Make sure to use quality tweezers and be careful not to pluck too many hairs. It is best to pluck a little bit at first and see how it looks and if you think that the hairline is still too dense, go back and repeat these steps.
Step 5
Another thing you want to avoid is having a mslynn straight line of hair at the hairline. That looks very fake, so you also want to break up those lines of hair by plucking. Create a smooth transition.
Step 6
Decide where you want to part the wig. You can do it in the middle or on the sides. Now go in the parting and pluck some of the hairs there as well. While you’re doing the plucking, try out the wig several times to track your progress and see where you need to pluck some more.
I hope you have found this guide useful. If you need any more help just let us know either by visit www.mslynnhair.com
You will need a 13x4 Lace Frontal, a Styrofoam wig stand, pins, tweezers, and scissors.
Step 1
When your wig arrives, the first thing you need to do is see if it fits. If the wig is too small or too large, you need to replace it. So, don’t start plucking before you make sure that you have bought the right size because you won’t be able to return 13x4 Lace Front Wig.
Step 2
If the wig fits and everything look good, you need thoroughly wash it.
Step 3
Place the 13x4 Lace Frontal Wig on a Styrofoam stand and use pins on the lace to pin it down. You want to have it nice and tight so that it doesn’t move.
Step 4
Take a good look at the wig hairline, you will notice that it is pretty dense and that’s what you want to avoid. Start plucking some hairs from one side and work your way to the other. Make sure to use quality tweezers and be careful not to pluck too many hairs. It is best to pluck a little bit at first and see how it looks and if you think that the hairline is still too dense, go back and repeat these steps.
Step 5
Another thing you want to avoid is having a mslynn straight line of hair at the hairline. That looks very fake, so you also want to break up those lines of hair by plucking. Create a smooth transition.
Step 6
Decide where you want to part the wig. You can do it in the middle or on the sides. Now go in the parting and pluck some of the hairs there as well. While you’re doing the plucking, try out the wig several times to track your progress and see where you need to pluck some more.
I hope you have found this guide useful. If you need any more help just let us know either by visit www.mslynnhair.com
